Vacancy at ConocoPhillips

EMPLOYMENT OPPORTUNITIES AT CONOCOPHILLIPS

ConocoPhillips is an international, integrated energy company headquartered in Houston, Texas, and operating in more than 40 countries.

As a Production Sharing Contractor for BPMIGAS, we operate many producing and exploration blocks in Indonesia. To support our expanding operations in Indonesia, ConocoPhillips is looking for talented Indonesian nationals to fill in the following position.

INTERNAL CONTROL SPECIALIST

Responsibilities:
• Provide advice to business management on system and control requirement procedures, regulation adherence and applicable contract agreement compliance to Indonesian and International laws and regulations.
• Manage the development, change & implementation of key business processes and SOX compliance to ensure alignment with internal control standards and deliver value creation
• Perform internal control review, audit, special review and provide recommendations
• Conduct financial due diligence

Qualification & Experience:
• Bachelor’s Degree or higher in Accounting, Finance or Economics with a minimum Grade Point Average of 3.5 average from reputable university - overseas university would be an advantage
• Minimum five (5) years of relevant working experience in Multinational companies/Accounting firms
• Internationally recognized qualification or certification (CIA/CPA/CFA/FRM, Tax Brevet B/C) would be an advantage.
• Strong analytical and leadership skills
• Must have good oral and written communication skills both Indonesian and English
• High proficiency in using Microsoft Office application including Microsoft project, Power Point and Excel.

Only those individuals who fully meet the above requirements need apply. Write down THE POSITION TITLE you apply in the subject of your email. Send your application and CV not later than two weeks after the publication of this advertisement for

RSCIndonesiaRecruitment@conocophillips.com

Other vacancies at ConocoPhillips Indonesia can also be accessed through JobsDB.com

Read More..

Vacancy at T.D. Williamson Asia Pacific Pte. Ltd.

URGENTLY REQUIRED

T.D. Williamson Asia Pacific (TDW) is an established and reputable Company providing unique specialty services and products to the Oil and Gas Industry. If you meet the requirements, we have excellent job opportunity for you based in Jakarta, Indonesia reporting to the Service Center Manager/Supervisor for the following positions:

Technicians (Hot Tapping & Plugging)

You Shall be Responsible:
• In scheduling and coordinating hot tapping and plugging (HT&P) work with customers
• To operate and supervise the handling, assembling, disassembling and operating of TDW HT & P equipments during field operations
• To update, maintain and comply to all company and industrial safety procedures and standards
• To maintain and repair all working equipments
• To write and submit relevant reports of each HT & P assignment upon completion on the equipment performance and related data.

You should have:
• GCE 0 Level or equivalent with a Technical Certificate in Hydraulics/Mechanical Engineering
• Three (3) years and above of working experience as Technician in similar industry or relevant field.
• Excellent interpersonal skills - ability to relate to people of different nationalities and different professions relating to work
• Good command of English in both writing and speaking
• A commercial driving licence
• A strong physique as the job may require to carry equipments up to 100 lbs

Technicians (In Line Inspection - ILD)

You Shall be Responsible:
• To operate and supervise the handling, assembling, disassembling and operating of TDW ILI equipments during field operations
• To perform Geometry and Magnetic Field Leakage Inspection work assignments
• To anaylse if field data obtained is acceptable based on standards or if re-run is required.
• To maintain and adhere to all company and industrial safety procedures and standards and conduct safety inspections and surveys in accordance with the established quality control for all assignments
• To perform routine and preventative maintenance on survey instruments (mechanical or electronic) for optimal field performance
• To assist in the development and testing of equipments for better tool performance
• To inspect equipments and materials and thereafter make better recommendations and procurement of the equipments and materials for improvements.

You should have:
• A Technical Degree in Mechanical/ Chemical Engineering
• Three (3) years and above of working experience as Technician in similar industry or relevant field.
• Experience and knowledge in corrosion engineering (will be an added advantage)
• Excellent interpersonal skills - ability to relate to people of different nationalities and different professions relating to work
• Good command of English in both writing and speaking
• A commercial driving licence
• Experience in Project Managing with supervisory skills

Experience working in the Oil & Gas industry for all the above positions is a definite advantage.

Interested candidates please submit a full resume not later than November 28, 2007 with non-returnable photograph to:

T.D. Williamson Asia Pacific Pte. Ltd.
4 Tech Park Crescent
Singapore 638128
Fax : 65 – 63648521
Email : tdwrecruit.feap@tdwilliamson.com

Read More..

Vacancy at PT. Indo Human Resource

CORPORATE HUMAN RESOURCE

Our Client a leading Qatar based Oil and Gas Services Company with an excellent work environment needs self- motivated and fully experienced technical personnel with good command over English & proficient in the use of computers.

All positions come with co. provided accommodation, yearly air passage & opportunities for training & career progression.

MECHANICAL TECHNICIAN (Code MT 01)
With experience and knowledge in the repair and maintenance of heavy mechanical equipment, forklift trucks, diesel engines, hoists, air compressor, plant machinery as well as general hydraulic and pneumatic equipment.

ELECTRICAL TECHNICIAN (ET 02)
With experience and knowledge in the repair and maintenance of overhead electrical cranes, electric motor driven compressors, welding equipment, motors and associated drives.

TECHNICAL MANAGER - VALVES (TM 12)
Experience in the repair, overhaul and calibration of safety valves, control valves, pneumatic & hydraulic actuators and on-line testing of valves. Petrochemical site and/or offshore working experience essential. The candidate will be expected to; manage team of valve technicians, carry out site surveys and prepare proposals, develop team and department capabilities and visit customers regularly.

TECHNICAL MANAGER - SPECIALIST SERVICES (SS 13)
Experience in the repair, overhaul and of electrical equipment used in hazardous areas. Additional experience on cranes, compressors, actuators would be advantageous. Petrochemical site and/or offshore working experience essential. The candidate will be expected to; manage team of electrical technicians, carry out site surveys and prepare proposals, develop team and department capabilities and visit customers regularly.

VALVE TECHNICIAN (VT 03)
With knowledge and experience in the refurbishment, repair, overhaul and calibration of all types of valves and control systems. Expertise in the repair of pneumatic/hydraulic actuators and oilfield equipment will be essential. Site and/or offshore working experience essential.

METERING TECHNICIAN (MT 04)
With knowledge in the calibration of systems and equipment used in the metering and flow measurement including transmitters, flow meters, PD meters, provers, orifice plates and densitometers.

SEAL TECHNICIAN (ST 05)
With knowledge and experience to repair, assemble and testing of mechanical seals used in oil and gas industries. Expertise in lapping of seal faces and analyzing the seal failure. Knowledge of dry gas seals will be preferred. Minimum qualification of degree or diploma holders preferably in Mechanical Engineering.

CALIBRATION ENGINEERS (CE 06)
With experience in electrical, pressure and temperature calibration standards and working within an accredited environment. There will also be a requirement to work on site on metering skids calibrating field instrumentation and previous experience is essential. The typical qualification expected is an engineering degree in a related subject such as electronics or physics.

HYDRAULIC TECHNICIAN (HT 07)
With knowledge and experience in troubleshooting and repairing heavy equipments. Also inspecting, repairing and maintaining heavy equipment such as excavators, wheel loaders, backhoe loaders, skid steer loader etc. Maintains all repair records including parts, fluids, labor, repair work and mileage.

ELECTRICAL WIREMEN (EW 08)
With knowledge and relevant experience in reading of electrical control wiring diagram, wiring of switchgear and electrical components. Must have experience in assembly of low voltage panel boards/ switchboards.

BUSBAR FITTER (BF 09)
With knowledge in Busbar fabrication and assembly of Busbar. Must have experience in assembly of low voltage panel boards/ switchboards.

DRAUGHTSMAN (D 10)
With knowledge and experience in the LV switchboard assembly with excellent knowledge of AutoCAD. Expertise in electrical controls, preparation of general arrangement drawings, single line diagrams, bill of materials etc. Must have experience in assembly of low voltage panel boards/ switchboards.

TOWER CRANE ERECTORS (TCE 11)
With knowledge in erection of tower cranes, mast climbing platform and hoists used in the construction of high-rise buildings.

All applicants should be proficient in use of computers, competent in Microsoft Word & Excel and should have a good command over spoken and written English.

Please your CVs indicating the code in subject column to:

PT. Indo Human Resource
Jl. Pemuda Kav. 79 No. 10
Rawamangun, Jakarta Timur 13220
PO BOX 1437 JKT 13014
E-mail : liez@corpHR.com/ database@corpHR.com
or Fax : +021 - 47882421

Read More..

Vacanct at International Oil & Gas Service Company

A reputable international Oil Gas Service Company having its operation and regional headquarter in Asia Pacific, invites experienced candidates to fill the following position:

Operation Engineer (Jakarta)

Principal Accontabilities:
• To execute all duties assigned by the Area Manager in an accurate and timely manners.
• To assist meeting business objectives and financial performance as set in the yearly budget.
• To prepare and deliver quality of all tenders and follow-up after submission and execution.
• To ensure high standard of quality in the delivery of services to customer satisfaction and set-up and up-to-date client database.
• To assist Area Manager and provide effective business intelligence to ensure successful tenders.
• To be responsible for manpower, material and equipment required for the projects as well as in the tenders.
• To be responsible for all general daily office administration and to comply with all licensing, legal and fiscal requirements in the area.

Job Requirements:
• Diploma or Degree in Engineering.
• 5 years experience in Oil & Gas Service industry
• Strong Communication and networking skills.
• Result oriented, cost minded and able to work under pressure and to meet deadlines.
• Fluent in English, written and spoken, able to elaborate comprehensive and well written proposals.

Interested candidates are invited to submit their details resume not later than December 1, 2007 with recent photograph to:

The Advertiser
PO.BOX 713 Balikpapan 76122

Read More..

Vacancy at DPS Indonesia

PT DPS INDONESIA Company is subsidiary of PETROCHINA Daqing Oilfield Company Limited, It’s main bisiness involves petroleum engineering technical services deals with oil & gas Exploration Technology, Enhanced Oil Recovery (EOR), Production Technology and other fields.

Now the company has rooted in the market of petroleum technical services in Indonesia. To support our expanding marketing operations in, we require a best talented candidate for significant position as Marketing Assistant Manager.

Job Description:
1. Collect the information about tendering and bidding in the market of Indonesian petroleum technical services and submit information reports in English to the General Manager
2. Participate in the whole commercial process of DPS for tendering and bidding and prepare necessary business documents.
3. Actively cooperate with market development managers of other projects, Besides consolideting current markets, develop new market and coordinate to complete other business work.
4. Ability to coordinate with Indonesian government, major petroleum companies especially with petroleum department and search for business opportunity;
5. Ability to communicate and cooperate with the agent company. Under the instructions of General Manager, keep good terms with agent company;
6. Ability to organize the implement project for presentation of the whole company product;

Recruitment Condition:
1. Male at the age max. 40 in perfect health
2. Bachelor degree at least and can use English fluently
3. Familiar with business process and rules regarding tendering and bidding for petroleum projects and some relative laws and regulations as well
4. Know some basic knowledge on petroleum technical services industry;
5. More than 5 years working experience in the field of Indonesian petroleum technical service
6. Good communication and relationship with Indonesian official petroleum departments and the major oil companies as well;
7. Working salary and other welfarces discussed in the interview.

Send your applications via email to: liuremail@sina.com
or via post to below address:

PT. DPS Indonesia,
Graha Kirana Building, 7th Floor, Suite 701,
Jl. Yos Sudarso No. 88,
Sunter, North Jakarta 14350
Indonesia

(not later than December 8, 2007)

Read More..

Vacancy at Baker Hughes

No Limits

As a leader in the oilfield services industry, Baker Hughes offers opportunities for qualified people who want to grow in our high performance organization. We are currently seeking Two 2 Rotating QA/QC Technicians for our INTEQ Division in Indonesia.

Quality Assurance/Control Technicians
Requisition ID 14370

Responsibilities:
- Assist R&M Manager and Quality Engineer in monitoring and maintaining Baker Hughes Quality Management System in accordance with ISO 9001:2000 QMS and QManage System.
- Document and administer document change process.
- Ensure periodic calibration of Inspection, Testing & Measuring Equipment for use in APMC, including Tracking and Serialization; coordinate with production department for equipment calibration; coordinate with external vendor(s) for equipment calibration not able to perform inhouse; perform in-house equipment calibration when possible as well as file and maintain calibration records.
- Maintain quality control documentations including material traceability record; inspection record and compilation of documentation package for job deployments.
- Conduct Internal Quality Audit on semi-annual basis to ensure compliance and implementation of corrective & preventative actions for continuous improvement.

Requirements:
- Bachelor degree in Mechanical/Electrical Engineering.
- Minimum 2-3 years experience in ISO 9001 :2000, API Spec. Q1 Management System, internal auditing, non-destructive testing and metal machining.
- Good command in English and computer skills.
- Preferably, domicile in Balikpapan and willing to be rotated in remote area.

To apply, please visit www.bakerhughes.com/careerportal and search for the job by the “Requisition ID” or by country (i.e. jobs based in Indonesia). Alternatively, candidates can send their CV to HR.Indonesia@Bakerhughes.com

Closing Date : not later than December 1, 2007.
Only shortlisted candidates will be contacted.

At Baker Hughes, there are no limits to what you can achieve.

BAKER HUGHES

Read More..