Vacancy at Fircroft; 6 positions

PT FIRCROFT INDONESIA

Our Client, a leading global independent energy company engaged in the exploration and production of crude oil and natural gas, as well as in refining and in marketing refined petroleum products, natural gas, and electricity is currently looking for these 6 (six) positions:

1. ASSISTANT PROJECT ENGINEER (Expatriate or National)

Job Description:
Reporting to and at the direction of the CPP Senior Project Engineer, responsible for providing project assistance during the project development and execution phases of the project, including, but limited to:
- Assistance in management of the Contractor project delivery team resources to meet the safety, environmental, technical, cost, quality and schedule requirements of assigned project scope in accordance with procedures;
- Coordination of project scope interfaces;
- Implementing project management systems, standard practices and design specifications required to effectively performing the design, procurement and construction process;
- Ensuring that all vendor data, design and operational information is obtained, reviewed and distributed in a timely manner;
- Ensuring that all cost commitments are recorded for assigned project scope and prepare final cost forecasts.

Personal Requirements:
- University graduate with a minimum of ten (10) years or more on offshore oil & gas related projects, and acted as a project engineer for at least four (4) years during this period on multi-million dollar projects;
- Strong interpersonal skills required;
- Experience as Clients Site Representative in supervision and management of construction activity;
- Mobility to be based at contractors sites consistent with the overall construction responsibility.

2. ELECTRICAL ENGINEER (National)

Job Description:
Provide electrical engineering advice during the project development and execution phases of the project, including, but limited to:
- Provide recommendations, input and direction regarding Contractor performance in electrical engineering;
- Review of all project electrical documentation including philosophies, specifications, calculation, reports etc as per project requirements in order to facilitate progress and to achieve fitness for purpose;
- Providing first line response to Contractors electrical engineering technical queries;
- Provide technical support through Engineering, Procurement, Fabrication and Installation/Commissioning activities.

Personal Requirements:
- University graduate in a related engineering discipline with a minimum of 8 years experience in power generation (MV/LV), distribution and motor control on projects of similar or larger scale;
- Able demonstrate a good working knowledge of international codes and standards appropriate to his discipline and should ideally come from a detailed engineering background within the Oil & Gas or petrochemical industry, preferably supplemented with construction and commissioning experience on projects of a similar nature;
- Familiar with all standard electrical engineering drawings, calculations and reports, and shall be capable of reviewing and guiding Contractor document submissions in all respects with particular emphasis on generator sizing, lighting calculations, load lists, overall single line diagrams, short circuit studies, load stability and motor starting analysis, protection co-ordination studies etc.

3. INSTRUMENT ENGINEER (National)

Job Descriptions:
Provide recommendations, input and direction during the development and execution phases of the project in the area of instrumentation engineering, including but not limited to:
- Review of all project E&I documentation as per project requirements in order to facilitate progress and to achieve fitness for purpose;
- Providing first line response to Contractors instrumentation engineering technical queries;
- Monitor the work of the Contractor and provide technical support through Engineering, Procurement, Fabrication and Installation/Commissioning activities;
- Responsible for ensuring that all aspects of field instrumentation, control systems, and inter-system communications interfaces necessary for successful operation of the platform process and utilities systems are according to the project specifications;
- Provide detailed direction and input, for all Instrument related documentation including but not limited to: control philosophies, specifications, data sheets, block diagrams, cause & effect matrices etc together with inter-discipline checks on associated equipments and systems;
- Work closely with the EPC Contractor to ensure achievement of Hesss goals without adversely impacting the EPC Contractors responsibilities under the Contract.

Personal Requirements:
- University graduate in a related engineering discipline together with a minimum of 8 years experience in Instrument and Control systems with particular emphasis on Programmable Logic Controllers (PLC), Distributed Control Systems (DCS) and Fire & Gas (FGS)/Emergency Shutdown Systems (ESD), preferably gained in the Oil & Gas /Petrochemicals industry;
- Able to demonstrate a good working knowledge of international codes and standards appropriate to his discipline and should ideally come from a detailed engineering background within the Oil & Gas or petrochemical industry, preferably supplemented with construction and commissioning experience on projects of a similar nature.

4. MECHANICAL STATIC ENGINEER (National)

Job Description:
Provide engineering advice during the project development and execution phases in the areas of mechanical static, package and rotating equipment design, including, but not limited to:
- Review documents and specifications as per project requirements in order to facilitate progress and achieve fitness for purpose design;
- Providing first line response to Contractors piping and facilities design and layout, rotating equipment and mechanical engineering technical queries;
- Monitor the work of the Contractor and provide technical support through Engineering, Procurement, Fabrication and Installation/Commissioning activities;
- Work closely with the EPC Contractor to ensure achievement of goals without adversely impacting the EPC Contractors responsibilities under the contract.

Personal Requirements:
- University graduate in mechanical engineering with a minimum of 10 years mechanical engineering design experience in the areas of static and packaged equipment. Further experience in rotating equipment and pedestal cranes would be an added advantage.
- A working familiarity with international design codes and standards is a basic requirement.
- Experience with support and contribution to project development teams and the management of contractors.
- Additional experience outside the design office environment such as in fabrication and site construction would be a plus.

5. SENIOR PROCESS ENGINEER (National)

Job Description:
Provide process engineering advice during the project development and execution phases including, but not limited to:
- Provision of specialist engineering support to project execution activities;
- Ensuring that appropriate engineering standards and specifications are defined and complied with;
- Respond to Contractors process engineering technical queries;
- Provide recommendations, input and direction to the Contractors process engineering design effort in order to facilitate progress and to achieve fitness for purpose; review and where necessary verification of design and engineering activities; ensuring process engineering deliverables comply with the project design and operation philosophies established in the design basis and/or performance specifications;
- Participation in Hazard Studies and risk assessments as required;
- Reviewing commissioning plans and procedures;
- Support to construction and commissioning activities.

Personal Requirements:
- University graduate in a related engineering discipline with a minimum of 10 years experience in offshore process facilities design, PFD and P&ID development, etc.
- Proficient in process engineering calculation i.e. mass and energy balances, hydraulics, equipment, sizing and rating, relief calculations, etc.
- Experience in the application of cause and effect diagrams and the use of API standards (API 14C, 520, 521 etc)
- Experience with process system control design and development of control philosophies.
- Experience in the use and application of process simulation software (Hysys, PROII etc)
- Experience in the support and contribution of project development teams and management of contractors.

6. PIPING ENGINEER (National)

Job Description:
- Provide recommendations, input and direction regarding Contractor performance in the areas of equipment/piping layout and design and review of piping documents and specifications to ensure Contractors compliance with the agreed scope of work in order to facilitate progress and achieve fitness for purpose.
- Provide technical support through Engineering, Procurement, Fabrication and Installation/Commissioning activities.

Personal Requirements:
University graduate in a mechanical engineering discipline and/or have at least 10 years piping engineering design experience and demonstrate ability of 3D model experience, either PDMS or PDS as well as experience in pipe stress analysis.

A highly competitive remuneration package will be offered to attract top caliber applicants. Please send your CV (in MS Word version) not later than January 10, 2008 to:

indonesia@fircroft.com